dfl3005 thru dfl310 surface mount glass passivated single phase bridge rectifier reverse voltage 50~1000v ountput current 3a www.goodark.com 1/4 2014.02-rev.a features ? glass passivated bridge rectifiers ? ideal for automated placement very low profile typical height o f19mm ? v ery l ow pro fil e - t yp i ca l h e i g ht o f 1 . 9 mm ? high surge current capability ? moisture sensitivity: level 1, per j-std-020 ? high temperature soldering guaranteed: 260 /10 seconds ? polarity:as marked on body mhil dt dfl m ec h an i ca l d a t a ? case:dfl,molding compound meets ul 94v-0 flammability rating ? weight:0.3435g typical applications general purpose use in ac - to dc bridge full wave rectification for vrrm 50 100 200 400 600 800 1000 v general purpose use in ac - to dc bridge full wave rectification for smps,lighting,adapter,charger,home appliances,office equipment,and telecommunication a pp lications maximum repetitive peak reverse voltage maximum ratings (ta = 25 c unless otherwise noted) parameter symbol dfl3005 dfl301 dfl302 dfl304 dfl306 dfl308 dfl310 unit vrrm 50 100 200 400 600 800 1000 v vrms 35 70 140 280 420 560 700 v vdc 50 100 200 400 600 800 1000 v io(av) a ifsm a i 2 t 15 a 2 peak forward surge current 8.3 ms single half sine-wave superimposed on rated load rating for fusing (t dfl302 dfl304 dfl306 dfl308 dfl310 unit r a ti ng f or f us i ng (t electrical characteristics (ta = 25 c unless otherwise noted) parameter test conditions symbol dfl3005 dfl301 maximum instantaneous forward voltage if=1.5a v f volts ta=25 ta=125 typical junction capacitance 4.0 v, 1 mhz c j pf a 21 1.1 maximum dc reverse current at rated dc blocking voltage i r 5 100 www.goodark.com 1/4 2014.02-rev.a
dfl3005 thru dfl310 surface mount glass passivated single phase bridge rectifier reverse voltage 50~1000v ountput current 3a www.goodark.com 2/4 2014.02-rev.a juntion to ambient r ja juntion to case r dfl306 dfl308 dfl310 unit thermal characteristics (ta = 25 c unless otherwise noted) parameter test conditions symbol dfl3005 dfl301 dfl302 dfl304 typical thermal it 1) 45 /w 15 j un ti on t o case r jc note:1),the thermal resistance from junction to ambient and case,mounted on p.c.b with 1313mm copper pads,2 oz,fr4 pcb cc resistance 1) 15 ratings and characteristics curves ( ta = 25 unless otherwise noted ) figure ? 1.forward ? current ? derating ? curve figure ? 2.maximum non \ repetitive ? peak ? forward ? surge ? current figure ? 3. ? typical ? reverse ? characteristics ? figure ? 4. ? typical ? instantaneous ? forward ? characteristics ? www.goodark.com 2/4 2014.02-rev.a
dfl3005 thru dfl310 surface mount glass passivated single phase bridge rectifier reverse voltage 50~1000v ountput current 3a www.goodark.com 3/4 2014.02-rev.a package outline dimensions in inches (millimeters) b 0.85 package unit: mm min a 1.7 a 1 c 02 dfl max 2 0.25 1.15 0.05 035 l 1 d e1 8.95 c 0 . 2 he 9.8 e2 8.13 10.3 0 . 35 5.08 typ 9.25 8.51 1.5 www.goodark.com 3/4 2014.02-rev.a
dfl3005 thru dfl310 surface mount glass passivated single phase bridge rectifier reverse voltage 50~1000v ountput current 3a www.goodark.com 4/4 2014.02-rev.a disclaimers these materials are intended as a reference to assist our customers in the selection of the suzhou good-ark product best suited to the customer?s application; they do not convey any license under any intellectual property rights or any other rights belonging to suzhou good ark electronics co any i n t e ll ec t ua l proper t yr i g ht s, o r any o th e r r i g ht s, b e l ong i ng t o s uz h ou g oo d - a r k el ec t ron i cs c o., ltd.or a third party. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, or infringement of any third-party?s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. all information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by suzhou good-ark electronics co., ltd. without notice due to product improvements or other reasons. it is therefore recommended that customers contact suzhou good- ark electronics co., ltd. or an authorized suzhou good-ark electronics co., ltd. for the latest product information before purchasing a product listed herein. the information described here may ti thil ii thil sh g dak el t i c ltd contain technical inaccuracies o r typographical errors. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. please also pay attention to information published by suzhou good-ark electronics co., ltd. by various means, including our website home page. (http://www.goodark.com) when using any or all of the information contained in these materials, including product data, when using any or all of the information contained in these materials , including product data , diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. the prior written approval of suzhou good-ark electronics co., ltd. is necessary to reprint or reproduce in whole or in part these materials. please contact suzhou good-ark electronics co., ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.02-rev.a
|
